Ecotherm Insulation

ecotherm insulation logo

High-Performance PIR Insulation for the Full Building Envelope

EcoTherm Insulation delivers superior thermal performance, low thermal conductivity, and outstanding compressive strength—making it a top choice for commercial and residential projects alike.

Made from rigid thermoset polyisocyanurate (PIR) foam, EcoTherm boards are faced with high-performance aluminum composite foil, giving them excellent durability, moisture resistance, and thermal efficiency.

Why Choose Ecotherm?

Have any questions? call us today!

0121 720 0694

Ecotherm Insulation Boards

All EcoTherm solutions are lightweight, easy to handle, and help reduce build time and cost without compromising on thermal performance.

Ecotherm insulation

Applications of EcoTherm Insulation

Wall Insulation

Suitable for internal or external wall systems

Roof Insulation

Ideal for flat and pitched roof applications

Floor Insulation

High load-bearing strength for all floor types

Ceiling Insulation

Enhances energy efficiency in ceilings and voids

EcoTherm Insulation

Product Description

EcoTherm is a high performance range of insulation solutions for the entire building envelope.

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Eco-Cavity.png

Eco-Cavity

1200mm x 450mm

Eco-Cavity is available in the following thicknesses: 50-100 mm.

Eco-Cavity is a partial fill cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity is ideal for use with masonry walls and can achieve good levels of thermal performance in thinner constructions whilst maintaining a clear residual air gap.

Product Highlights 

  • Suitable for use within partial fill cavity walls

  • Air gap between the insulation and masonry outer leaf acts as a barrier to external moisture penetration

  • Lightweight insulation – easy to transport

  • High Performance rigid polyisocyanurate (PIR) insulation core

  • Aluminium composite foil facing to both sides

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Eco-Cavity-Full-Fill.png

Eco-Cavity Full Fill

1200mm x 450mm

Eco-Cavity Full Fill is available in the following thicknesses: 90 mm, 115 mm and 140 mm.

Eco-Cavity Full Fill is a cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity Full Fill is ideal for use with masonry walls and is suitable where the requirement is for insulation to completely fill the cavity, whilst maintaining a residual 10 mm cavity to resist moisture transfer.

Product Highlights 

  • Suitable for use in full fill cavity wall applications, allowing for optimal thermal performance to be met.

  • Tongue and groove edges allow for easy installation

  • Lightweight insulation – easy to transport

  • High performance rigid polyisocyanurate (PIR) insulation core

  • Aluminium composite foil facing to both sides

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Eco-Versal.png

Eco-Versal

2400mm x 1200mm

Eco-Versal is available in the following thicknesses: 25-150 mm.

Eco-Versal is a 5 in 1 insulation board with a thermal conductivity of 0.022 W/mK. It is suitable for a number of different applications, including cold flat and pitched roofs, floors and timber frame construction. Eco-Versal can also be used to upgrade insulation on most internal and external walls.

Product Highlights 

  • A 5 in 1 solution that’s suitable for insulating floors, walls, roofs, dormer cheeks and ceilings

  • Rigid insulation board with a thin profile that’s easy to cut and install

  • Lightweight insulation – easy to transport

  • High performance rigid polyisocyanurate (PIR) insulation core

  • Aluminium composite foil facing to both sides

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Eco-Liner.png

Eco-Liner

2400mm x 1200mm

Eco-Liner is available in the following thicknesses: 37.5 mm – 82.5 mm (insulation + plasterboard).

Eco-Liner is an insulated plasterboard for mechanically fixed & adhesively bonded drylining systems. The insulation component has a thermal conductivity of 0.022 W/mK. This 2 in 1 board insulates and finishes walls in one application. Eco-Liner is an ideal insulation product for internal walls and pitched roofs.

Product Highlights 

  • A 2 in 1 solution for insulating and drylining walls in one application, meaning only one board to cut, carry and fix

  • High performance rigid polyisocyanurate (PIR) insulation core with a tapered edge 12.5mm gypsum plasterboard 

  • Ideal for room-in-the-roof applications, walls and cold flat roofs

  • Insulation component thermal conductivity of 0.022 W/mK

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Inno-Torch.png

Inno-Torch

Inno-Torch is available in the following thicknesses: 30 mm – 150 mm (1200 mm x 600 mm boards)

 Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks.  With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions.

Product Highlights 

  • Can be fitted with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems

  • Suitable for use on new and existing concrete, timber and metal decks 

  • Lightweight PIR insulation boards are easy to transport, cut and install

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Inno-bond.png

Inno-Bond

Inno-Bond is available in the following thicknesses: 

25 mm (1200 mm x 600 mm boards)

50 – 150 mm (1200 mm x 1200 mm boards)

160 mm (1200 mm x 2400 mm boards)

Inno-Bond flat roof boards offer a lightweight, durable solution for new and existing flat roofs with a thermal conductivity as low as 0.024 W/mK. Inno-Bond flat roof boards are suitable for use with fully adhered single-ply waterproofing systems on concrete, metal and timber decks. Inno-Bond flat PIR roof insulation boards deliver excellent thermal performance, helping to hit target U-values with slim constructions.

Product Highlights 

  • Compatible with new and refurbished roofs

  • Can be fitted under fully adhered, single-ply membranes

  • Suitable for use on concrete, timber and metal decks

  • Rigid boards are easy to transport, cut and install

https://www.studandtrack.co.uk/wp-content/uploads/2024/03/Inno-Fix.png

Inno-Bond

2400mm x 1200mm

Inno-Fix is available in the following thicknesses: 25-160 mm

Inno-Fix PIR insulation boards offer a simple, lightweight solution for use on new roofs or to upgrade the thermal performance of existing roofs. The rigid boards are specifically designed for use with single-ply waterproofing membranes on concrete, metal or timber decks, achieving a thermal conductivity of 0.022 W/mK.

Product Highlights 

  • Designed for use with mechanically fixed single-ply membranes

  • Compatible with new and refurbished roofs

  • Suitable for use on concrete, timber and metal decks

  • Rigid boards are easy to transport, cut and install

Ready to Order or Need Advice?

Our expert team is on hand to help you select the right EcoTherm insulation for your project. Whether it’s technical advice, U-value calculations, or tailored supply solutions – we’ve got you covered.

📞 Call us: 0121 720 0694

Need pricing for your next project? Whether it’s drylining, SFS, ceilings, cladding, or fixings – we’ve got you covered. Fill in your details and our expert team will be in touch shortly.

Get a Free Quote!